Spindle and Arm Drilling Guide 模型预览

GrabCAD 模型信息

Spindle and Arm Drilling Guide · 模型 409666

作者:Kevin Sullivan

These are the parts to a spindle and arm drilling guide. There are three components to print. 0.625 in Drill Guide Cap.stl 0.625 in Drill Guide.stl 0.625 in Point.stl There are a handful of components you will need to buy to accompany these 3D printed parts. A vendor I went through is McMaster. The part numbers, quantities and descriptions are provided below: T-Slotted Framing Single Four Slot Rail, Silver, 1" High x 1" Wide, Solid || Part # 47065T101 || pick any length you see fit, I went with 18” T-Slotted Framing End-Feed Nut and Button Head, for 1" and 25 mm High Rail || Part # 47065T139 (the ¼” x 20 x ½” screws) Press-Fit Drill Bushing 0.625" ID, 3/4" OD, 5/8" Long || Part # 8491A826 18-8 Stainless Steel Button Head Torx Screws 8-32 Thread, 1-1/2" Long || Part # 90600A305 18-8 Stainless Steel Hex Nut 8-32 Thread Size || Part # 91841A009 18-8 Stainless Steel Washer for Number 8 Screw Size, 0.172" ID, 0.375" OD || Part # 92141A009 Assembly after this is straightforward. This chair rail and arm drilling guide is ideal for drilling holes in arm rails for Windsor chairs and stick chairs. This is similar to other designs out there I have seen, only this is cheap and easy to make. One could print these parts at a local makerspace, a public library, or their personal 3D printer, for an economical price. Everything else cost me about $45 (2024) after shipping and tax via McMaster. And if you used a piece of wood to screw these 3D printed parts to, you could have this for even cheaper. This tool is a great accompaniment to anyone who wants to make chairs that have been made popular by the likes of Chris Schwarz, Curtis Buchanan and Peter Galbert. As far as function goes, it’s as good as any one you could purchase. My Dewalt (no affiliation) drill fits with a bit in it and has clearance alongside the aluminum rail. Unlike some tools us chairmakers need to make, or spend a ton of money on, this is cheap and easy and comes out remarkably accurate. I hope it works as well for you as it does for me. I’m not trying to take food off someone else’s table by offering these parts up for free. I hope you enjoy chair making and use this tool to the end of its useful life and buy a nice one because you need it. The intention of these files is to help get you started. Eventually I will try to post ½” and ⅜” drilling guides, and maybe a 10mm cause that is what Elia Bizzarri uses (or did use for a while).

格式
STL
分类
Furniture、Hobby、Tools
标签
chair rail drill guide、arm drill guide、drill guide
数据更新
2026-09-10T11:54:56Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。