GrabCAD 模型信息
Spur Gear Set · 模型 123732
Set Of Spur gears that you can Change Through Parameters. - Drive Shaft distance between gears. - Gear Ratio Gear Ration is worked out by setting the Toal teeth between the 2 gears, this must be the same on each, the default is set to 120, and then The 2 gears teeth need to sum to 120 to so they mesh. Drive Gear - 60 and Move Gear - 60 -> 1:1 Drive Gear - 40 and Move Gear - 80 -> 2:1 Gears are Proper Involute curves and the equations are there if you want to adjust Modulo. I have a slight offset so the gears summed Radius's do not equal exactly the drive shaft distance as that cause them to bind. You need a bit of slop, lol. It is also slightly offset more to account for 3D printing on a 0,4mm nozzle. They worked for my Bambu Printer.
- 格式
- SOLIDWORKS、Rendering
- 分类
- 3D printing、Components、Robotics
- 标签
- pair、spur、gears
- 数据更新
- 2026-10-18T10:26:49Z
