GrabCAD 模型信息
Stacker for sheet metal coils · 模型 314483
Stacker for sheet metal coils The project contains 7474 parts. [Please, if you like or download my model, hit the 👍 button and maybe you can buy me a book (because i don't like Coffee :)) to support my work :-) 👇] https://www.buymeacoffee.com/matdesign3dcad Coil stacker Length: 6500mm, width: 5000mm, machine height 2650mm - - Frame drives: realized through toothed belts, transmission of drive by coupling 2 gears with a chain. -Used drives: 120 hz motors with encoders to peak the correct position of the device. -Vacuum: used 4kW pump with very high power of 500mbar. - 10 suction mats each with a lifting capacity of up to 40 kg. -Maximum carried weight 380Kg. Although most sheet metal coil stackers operate on the principle of magnetic grippers. here I struggled with the problem of improving the production process because the company produced elements from magnetic steel and non-magnetic steel. The project was carried out for a company in Poland. Although the concept of the project took about 4 months, in the end the project was created with many changed assemblies and parts. One vacuum pump was not enough for such heavy elements, it was necessary to use 1 pump for 5 suction mats. The rotation of the suction mats after fastening the sheet metal disc with tape has been added. 1 beam from the structural frame has been cut to a minimum. The vacuum components used were from schmalz, due to the emerging air resistance, I resigned from the air filter at the pump outlet. Unfortunately I can't share the whole concept in solidworks. Design made in Solidworks 2021, renders: Solidworks 2021.
- 格式
- SOLIDWORKS、Rendering、STEP / IGES
- 分类
- Electrical、Machine design、Tech
- 标签
- conveyor、stacker、pallet、sheet、forklift machine、engine、motor、line packing、robot、palletizing、automatic、pneumatic、bearings、belts、shaft、gear、coil、slitting lines
- 数据更新
- 2026-11-09T04:46:16Z
