GrabCAD 模型信息
Stand Triple SCREEN 27" Playseat Evolution · 模型 56994
- The attached components have been designed exclusively for use with 3 x 27-inch screens (W 612 x H 364mm) to be used with an external tilt of 55 - 60° - The components were printed in ASA. The measurements may not match the profiles you end up purchasing. - The components are milled from BRASS. You can use aluminum or any other suitable material to support the load of each screen. - Caps may not match the shape of other profile types - The ASA side bracket feet and center fitting may require shims of various sizes inside them to achieve proper leveling. - The side profiles in the 3D model are a few centimeters shorter than the physical component I purchased, as my driving seat is higher having mounted wheels under the wooden board. - The seat, which I remodeled, comes from user Drastik 118Cl210 - Suggested screens: 27 inches (W. 612 x H. 364mm) 1080p 120Hz (minimum!!!) - Suggested Video Card: NVIDIA RTX 4060 8Gb (minimum!!!) ATTENTION! The attached models may differ from the actual measurements or not correspond to the structure of your Playseat Evolution. The structure was specifically designed with profiles that fit together to achieve a linear visual effect. This results in limited modularity and a lot of testing before getting the side screens positioned correctly. In the attachments you will find the list of profiles with their relative openings and lengths. I haven't included the hardware, but you can extract it from the 3D models. - Total price of stand materials: approximately 150 euros. I assume no responsibility for damage to your equipment, animals, people, or property. Do everything at your own risk.
- 格式
- STL、Rendering、Other、STEP / IGES
- 分类
- 3D printing、Just for fun、Miscellaneous
- 标签
- screen 27、sim racing、playseat evolution、stand triple screen
- 数据更新
- 2026-10-09T09:37:25Z
