Stax Aruduino prototyping enclosure 模型预览

GrabCAD 模型信息

Stax Aruduino prototyping enclosure · 模型 323889

作者:Stephen Nyberg

Here is an entry for the https://grabcad.com/challenges/stax-accessory-challenge. This is still a work in progress and I have been having a hard time getting the Stax files into SolidWorks 2012 to allow me to render them with my model so look for updates... but I wanted to get what I had going up here as I have already seen one other Arduino case. This is based of the Arduino Uno but any board (I think most of the Arduinos and compatible boards will work). there is room for one micro-controller with a shield and below there is a flat area where a small breadboard or battery pack could be attached. on the back side, there is a nice flat area perfect for a solder-less breadboard wtih cutouts near the Arduino pins to allow for jumpers to passed to the other side. the sides of the enclosure are flat to allow it sit on your desk when wiring and building your circuit and the ridge is sized to be held snugly in the Stax system for safe keeping. This accessory needs four (4) of the StaX mid parts and works best if the top is used as the base and bottom is used as the top to provide easy access to the USB and power. In the renders I used https://grabcad.com/library/arduino-uno-r3-1 by https://grabcad.com/andrew_whitham-1 and https://grabcad.com/library/breadboard-for-electronics-projects-1 by https://grabcad.com/shane.anderson-1. Thanks guys!

格式
SOLIDWORKS 2012、STEP / IGES、STL、Rendering、Other
分类
Electrical、Hobby、Robotics
标签
arduino、staxaccessory
数据更新
2026-10-10T16:27:00Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。