GrabCAD 模型信息
Steam accumulator v1 · 模型 40754
As the availability of fresh steam (in a certain process) must be secured at all times and the demand itself may vary, there will be certain times when the production of steam will be larger than the demand and a certain amount of steam in the form of a surplus may become unusable. On the other hand, the demand for fresh steam at certain times may be greater than the steam generated by the boiler. Installing a steam accumulator in the steam generating system helps with this problem. Due to the mentioned reasons, a steam accumulator is installed only into those plants where there are peaks in the demand for steam, that is where a certain oscillation is present so that the installation of the accumulator will result in savings of energy and a higher quality of the product/service. Shell material = P265GH steel Wall thickness = 12 mm Overall volume = 22,4 m3 Working water volume = 13,5 m3 Max. pressure = 13 bar ( 14 bar a) Working pressure = 10 bar (11 bar a) Max. steam velocity through the injectors = 21 m/s Mass (without the platform) = 6 500 kg There are still many parts which need redesign (and some other ideas) so I will probably make the "version 2" of this accumulator and upload again after finishing it. Cheers, Petar
- 格式
- CATIA、Rendering
- 分类
- Energy and Power、Industrial design、Piping
- 标签
- water、vessel、assembly、steam、pressure、accumulator、ped
- 数据更新
- 2026-09-15T09:55:14Z
