GrabCAD 模型信息
Supply Container and Supply Hovercraft · 模型 141890
A detailed report is attached below with the files Overview: About the product The following product is a supply container that is attached to a hovercraft. The container and hovercraft have been designed using Solid Edge and rendered using Fusion 360. The container consists of 3 main parts; 1) Base 2) Covering 3) Opening The base and the opening are locked together via 5 bolts and do not move with respect to each other. Whereas the covering slides along the base through grooves and is restricted due to an attachment on the opening. The tolerances of the covering are made in such a way that it forms a tight press fit with the base and opening. This can be done due to the flexibility and ductility of the thin covering. The weight of the covering is optimized with the help of generative design. Due to unavailability of licensed Solid Edge. The generative design obtained could be changed into a construction body. So, cut and fillets were made in the original model by placing the generative design on top of it to obtain a similar design. To prevent damage to the supply a transparent covering film layer is applied and stuck to the covering. This will prevent water from entering the supply. Why is the product better than the rest? 1) The product being on a hovercraft will not have any major shocks that occur for example in aerial drones when the container hits the ground. 2) Simplistic design which is easy to print 3) Use of generative design to reduce material used and time 4) Easy opening and closing mechanism 5) Fully 3D printable 6) Innovative and Unique Material The model is completed design using 3D printed PLA with an infill of 20% and a layer height of 0.2mm A supply hovercraft drone capable of delivering food and medical supplies, in the harshest of climate. The Hovercraft has been made on Solidedge and rendered via Keyshot Why a Hovercraft? Unlike a drone it can work in harsh windy conditions (floods) and it has a larger battery life and payload carrying capacity as it doesn't directly work on the principle of a motor giving it thrust, rather it works on the principle that an air cushion formed beneath it will create pressure and lift the hovercraft causing it to hover. This hovercraft consists of a cover which has been optimized with the help of generative design in SolidEdge. The hollow part of the cover is sealed tight by applying a film over it. The back motor mount is also optimized with the help of generative design and consists of 3 BLD...
- 格式
- Rendering、Solid Edge、STL、STEP / IGES、Other、SOLIDWORKS
- 分类
- Aerospace、Automotive、Robotics
- 标签
- grabcad、drone、hovercraft、mechanical、asmedronesforsocialimpact
- 数据更新
- 2026-10-15T02:41:14Z
