Suspension capable coaxial swerve drive (FRC Team 2903) 模型预览

GrabCAD 模型信息

Suspension capable coaxial swerve drive (FRC Team 2903) · 模型 417817

作者:Darius Storm

FRC team 2903 The Neobots are proud to present our first public swerve drive design. The IP-S NSD MkVI-C (Internally Powered Suspended Neo Swerve Drive Mk VI -Block C) is a coaxial swerve drive designed to offer several unique features never before seen in previous modules, such as a sub-10-second toolless wheel cartridge swap system, the ability to mount a suspension with minimal effort, and an accessibility focused pin mounting system. ------------------------------------------------------Features------------------------------------------------------ Quick swap: Innovative swerve module system allows for easy maintenance and troubleshooting with more wheel "cartridge" designs (High-Speed Cartridge, Tank Cartridge) coming in the future for increased flexibility on the field. This system works through the use of a spring card retainer system and four retaining pins mounted on each wheel cartridge. By depressing a lever on the side of the module, this spring card is displaced, disengaging the pins and allowing the old module to be removed. New modules are simply inserted into the slot in the carriage, and the spring card latches onto them automatically. Suspension capability: With the addition of four small springs/rubber dampers (in conjunction with lengthened 10-32 mounting pins and driveshaft) this module can mount a basic suspension, allowing it to sustain drops and shocks with ease. Pin Mounting System: The shortened frame extrusion pieces you see in the CAD model are not shortened to make the model smaller. Frame extrusion is intended to be cut to just two inches outside the perimeter of the module in order to accommodate a pin and gusset based mounting solution. Rather than directly bolting each module to the robot, 2.5" pins are to be inserted through gussets, and into the holes in the top of the frame extrusion of the module. In order to facilitate easy removal, all electrical connections to and from the module are run through a 3D printed Junction bracket, with quick disconnects for all cables. This allows each module of the drivebase to be completely removed, greatly improving serviceability. ------------------------------------------------------Specs------------------------------------------------------ Defense Cartridge: Free Speed: 9.03 fps Push Force (four modules): 192.93 lbs Weight: 8.63 lbs/module High-Speed/Offense Cartridge: Free Speed: 15.18 fps Push Force (four modules): 114.8 lbs Weight: 8.62 lb...

格式
Rendering、Other、STEP / IGES
分类
Robotics、Tech
标签
frc、swerve、drive、coaxial、omnidirectional、movement
数据更新
2026-11-20T05:05:01Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。