SYK BK15 Bearing Block 模型预览

GrabCAD 模型信息

SYK BK15 Bearing Block · 模型 361951

作者:Guss Davey

This is the SYK BK15 fixed side support usually used with a 20 mm diameter ball-screw. (SYK is Taiwan and not China). Matching float side (BF15) can be found here: https://grabcad.com/library/syk-bf15-bearing-block-1 I'm not sure about the seals, but because all of this is Solidworks parts, it is easy to change the seal(s). I also added a spacer to the ball screw side between the angular contact bearing and the shoulder of the shaft, which is not in the pictures they show on their site (again, remove if you want to) Please note that the center of the shaft is 28 mm from the bottom reference side of the block for this SYK block. SKF for example it is 26 mm, so if you adapt these parts to other manufacturers support units, please confirm these dimensions. Zapp Automation in UK say it is interchangeable with THK, NSK, and Kuroda. You have to confirm this yourself. I had a step file of a SKF one, and that was NOT exactly the same (26 mm vs 28 mm shaft center height) Before using this in you machine design, please confirm the whole patterns, and center of shaft dimensions, as it seems that some manufacturers differ from each other. I had no idea what angular contact bearing to use, so I guessed based on what the diameters SHOULD be. Inside is 15 mm and outside is 32 mm. I had a angular contact bearing in my part catalog of these diameters, which is 9 mm wide. Added 2 of them, back to back. Link: http://www.zappautomation.co.uk/mechanical-products/ball-screw-supports/bk-type/bk15-c5-ballscrew-support.html and http://www.zappautomation.co.uk/productattachments/index/download?id=123

格式
Parasolid、SOLIDWORKS 2015、STEP / IGES、Rendering
分类
Components、Machine design
标签
screw、support、ball、unit、syk、bk15
数据更新
2026-11-15T10:51:45Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。