Taig 2019 Y-axis extension 模型预览

GrabCAD 模型信息

Taig 2019 Y-axis extension · 模型 388809

作者:anony mouse

The lead screw on the taig Y axis has 0.75" that is unused, this spacer will use that. This will upgrade your mill from 5.5 inches of Y travel to 6.25 inches a 13% increase. If you go beyond 0.75" (you can do just over 1") you will not be able to mill hard materials like metals without excessive chatter and other undesirable effects that will degrade the performance of your mill. If you are only machining wax or maybe some woods then it shouldnt be a problem. Extra parts needed: (8) 10-32 x 1-1/4” Socket Head cap screw for the spindle mount plate (2) 10-32 x 1-1/2” Socket Head cap screws for the bed extension Move the Y axis near the headstock and turn all power off to your mill. Remove the spindle and motor and set aside. Remove the dovetail that held the spindle (either 6 or 8 screws depending on your model). Insert the headstock spacer and reattach the dovetail. Then reattach the spindle and motor assembly. You should now tram the headstock and see if you need any shims. You do not get a reliable reading without the spindle attached. Newspaper works great which is about 0.0025" thick. Move the Y-axis near the headstock to get it out of the way. Remove the two screws that connect the stepper motor to the lead screw. Gently pull on the stepper motor and the table and screw will slide towards you. Insert the spacers and new screws and tighten. You have have some difficulty wiggling everything into place if you do not remove the stepper motor but with some patience and lining it all up before you tighten it can be accomplished. Adjust your control software to allow for the extra distance.

格式
Rendering、STEP / IGES
分类
Fixtures、Machine design、Tools
标签
cnc、bed、extension、axis、taig、y-axis
数据更新
2026-10-28T19:36:52Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。