GrabCAD 模型信息
Temperature Module New Battery and Case · 模型 339833
I have a simple internal and remote temperature station with an LCD display (by Ascot). My remote temperature sensor is battery powered with 2 x AAA batteries. I find these batteries don't last long (<6 weeks) and become ineffective once the battery level drops to about 1.4V per cell, especcially in the colder months. My battery solution is to replace the AAA batteries with a single 18650 LiPo battery. The battery is rechargeable and should last for many month of use. Of course the new thermometer and LiPo battery needs a new enclosure to protect it from the elements, so this custom 3D printed case was designed. The temperature module has a measured quiescent current 650uA, with regular power spikes during temperature signal transmission. To note, a fully charged LiPo battery will have a voltage in excess of 4V. To avoid the excessive high voltage across the thermometer, I have included a diode in series with the LiPo to drop the voltage by 0.6V. Possible Design Improvements: 1. Include a LiPo charging circuit with external DC charging connector. 2. Improve case to provide flex support for front panel. 3. Re-position case side airflow vent to accurately align with thermometer module. My print is made in PETG 1.75mm Aurarum silver filament, with 0.2mm layer height and 25% infill on a PRUSA I3 MK3S printer. I hope you can find this print useful, too.
- 格式
- Rendering、STL
- 分类
- 3D printing、Components、Household
- 标签
- temperature、module、new、battery、case
- 数据更新
- 2026-11-11T05:28:39Z