GrabCAD 模型信息
Tesla Turbine Stirling Engine. Moteur Stirling à turbine de Tesla · 模型 380414
This only is a study. Thermodynamic principles applied from the Stirling piston engine to a Tesla's turbine with compressor wheel turbine engine. First is centripetal, thanks to the Coanda effect, discovered by Tesla. Second is centrifugal, used in turbocharger. The transfer of work by heat occurs only over half a stroke with a piston, evacuating the heat lost in the counter-stroke back. But it starts by itself, making it a practical engine that was "connected" by contact to steam pipes to extract only heat. In the case of turbines, it will be needed to set it in rotation firth by a motor/generator to initiate movement. But once the phenomenon begins, there is no half a stroke, by a continuum flood like steam turbines. Conventional centrifugal turbine cannot produce air compression into its own center. Not a Tesla's, which forces the fluid to follow a centripetal trajectory. Temperature decrease along disks hot blades loosing heat, forcing the air to the center, to produce the mechanical torque. The classic turbine extract and create the needed vacuum to run. It should operate over 10,000 rpm at high temperature (over 250°C). Ball bearings of the turbine have to be ceramic and Tesla's disks Nickel/invariant. So, in Tesla Turbine case, it would be interesting to verify if he wasn't a little pretentious in predicting efficiencies over 90%... This, may be, could make it an excellent self-contained generator powered by solar or methane or whatever is hot.. This remains have to be studied. Right now this generator doesn't exist.
- 格式
- STEP / IGES、Rendering
- 分类
- Electrical、Energy and Power、Machine design
- 标签
- tesla turbine、stirling motor、heat power
- 数据更新
- 2026-11-10T18:55:56Z