Test On Pivot Pin With Force Normal To Layer Deposition Axis 模型预览

GrabCAD 模型信息

Test On Pivot Pin With Force Normal To Layer Deposition Axis · 模型 336592

作者:Mark Tommis

This is a quick and dirty test on the shear strength of a hinge pin printed vertically. The test is to examine the strength of the pin in my Champs design 3.03. It has a pin diameter of 7mm and 3 shearing points. Image A shows the test part - The red material is a simple carrier to connect the loads to and impose the shear load to the pin bearing faces. Image B - a cross section for clarification Image C - the printed hinge for test Image D - the test to failure Image E - my test apparatus (don't laugh) - I do not have access to a tensile test machine so i had to improvise using a spring balance. I do not presume this to have a high degree of accuracy but it was purchased new for this test. - A magnet was placed on the scale face which was moved down the scale as the force increased and remained in position when the specimen broke, indicating the maximum load. The test part failed with approximately 32kg of load (c.314N) I will perform a further 2 tests to establish an average result and try to identify any spurious result.

格式
STL、Rendering
分类
3D printing、Aerospace
标签
champs
数据更新
2026-10-24T14:46:14Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。