GrabCAD 模型信息
The Gravitron : Anycubic i3 Mega Orbiter 1.5/2.0 adapter · 模型 196974
This is a simple mount made to simply fit the Orbiter 1.5 and 2.0 extruders on the older Anycubic i3 Mega series (Mega, Mega-S, Mega-X, Mega-Pro). You'll need only a few M3 screws, M3 square nuts or hex nuts or heat-set inserts, and a bit of time. All the assembly information is contained within the attached step-by-step PDF guide. Although this part can be printed in PLA (I used a PLA prototype for a long time before switching to ABS), I'd suggest printing it in PETG/PCTG if you don't enclose your printer. Should you enclose it, print this adapter in ABS/ASA or whichever temp-resistant material matching your own use. 3 perimeters, 25% infill (cross-hatch, gyroid, or honeycomb/3D honeycomb pattern preferred). As for resolution, it's up to you. I made mine in 0.25mm/layer resolution with 3 perimeters and 1mm thickness for top/bottom, since it's usually what I tend to use for functional parts. You may use finer or coarser layers if you will. Granted your machine is properly dialed in, it should be an easy print that fits nicely ! :)
- 格式
- STEP / IGES、STL、Other、Rendering
- 分类
- 3D printing、Fixtures
- 标签
- adapter、orbiter、mega、i3、anycubic
- 数据更新
- 2026-10-13T06:59:56Z
