GrabCAD 模型信息
Tie Rod Cylinder With Position Measuring Systems CST3 - MT4. - Bore Diameter D= 63mm. - With Stroke Length S= 500 mm. · 模型 119794
Based on the Bosch Rexroth technical documentation, the CST3-MT4 configuration with a 63 mm bore and 500 mm stroke is a valid combination, though it sits near the upper limit for this specific mounting type at the nominal pressure. 🔧 Key Specifications: CST3-MT4, 63mm Bore, 500mm Stroke The MT4 mounting style designates a trunnion (pivot) mount, allowing the cylinder to follow the arc of a moving mechanism and compensate for angular misalignment . Parameter Specification Series CST3...Z (Differential cylinder with integrated position measuring system) Mounting Type MT4 – Trunnion mount in cylinder center Nominal Pressure 160 bar (16 MPa) Bore Diameter (ØAL) 63 mm Stroke Length (S) 500 mm Standards ISO 6020-2, DIN 24554, NF/ISO 6020-2 ⚠️ Critical Buckling Check for MT4 Mounting For the MT4 (trunnion) mounting, the admissible stroke length is significantly more restricted than for other mounting styles due to buckling considerations. Based on the Rexroth buckling tables for a 63 mm bore with a 36 mm piston rod at 160 bar : Installation Orientation Admissible Stroke @ 160 bar 0° (Horizontal) 510 mm 45° 575 mm 90° (Vertical) 530 mm Your requested 500 mm stroke is within the permissible range, but only just—it is very close to the 510 mm limit for horizontal installation. For vertical applications (90°), the limit is 530 mm, so 500 mm is also valid there. 📡 Integrated Position Measuring System The CST3 series features a magnetostrictive position measurement system providing non-contact absolute position feedback . Available output options typically include: Analog: 4-20 mA or 0-10 V Digital: SSI, CANopen, PROFIBUS-DP, or IO-Link 🧾 Ordering Code Reference The ordering code structure for your cylinder follows this format : text CST3MT4/63/[Rod Diameter]/500Z... Example: CST3MT4/63/36/500Z... CST3 = Tie rod cylinder with position measuring system MT4 = Trunnion mounting in center 63 = Bore diameter (mm) [Rod Diameter] = 36 mm (standard for this bore) 500 = Stroke length (mm) Z = Design principle (head and base connected by tie rod) ⚠️ Critical Ordering Note For the MT4 trunnion mounting, the trunnion position is freely selectable. When ordering, you must always specify the "XV" dimension in mm in the plain text on the order . The recommendation is to locate the trunnions in the middle of the cylinder .
- 格式
- Parasolid
- 分类
- Components、Industrial design、Machine design
- 标签
- linearpositi、noncontactmeasurement、magnetostrictivesensor、positionmeasuringsystem、pivotmount、trunnionmount、mt4mounting、cst3mt4、motioncontrol、hydraulics、industrialhydraulics、cst3、tierodcylinder、hydrauliccylinder、rexroth、boschrexroth
- 数据更新
- 2026-10-16T16:56:48Z
