GrabCAD 模型信息
Towel Stake · 模型 345882
The Towel stake is a two piece snap fit design, created for the Extreme redesign challenge. The snap fit component traps a beach towel on each side, this solves the problem of towels blowing away and folding up when laying on it. The first part is a rectangular cone like shape that will be able to be pushed into the sand on the beach. There's two rectangular holes on two sides of the cone, to enable sand or dirt to fall into the cone, making the cone more stable. A flat surface on the bottom of the cone has two holes equal in diameter and one hole smaller than the other between the two. This feature lets the sand or dirt fall out when removing it from the ground. At the top of the Rectangular cone there are four fillets That are used as a snap feature. The second part is in a shape of a larger rectangle than the main cone. The second part is shelled out to be able to bend. On the side of the second rectangular part there are four fillets, these features, when snapped together, pass each other to trap the beach towel in between to two pieces. The Next feature is a filleted hole for your finger,which helps you pull the two pieces apart t. By using four of these designs and placing one per side, this design will solve the problem of a folding towel and blowing away.
- 格式
- STEP / IGES
- 分类
- 3D printing、Household、Tools
- 标签
- extremeredesignengineeringsecondary2017
- 数据更新
- 2026-10-30T03:50:07Z