Two-Position Spool Valve (GA-59) 模型预览

GrabCAD 模型信息

Two-Position Spool Valve (GA-59) · 模型 399618

作者:W_M.

The GA-59/1 is a two-position spool valve, operated by a spring on one side and hydrostatic pressure supplied from the main system through a nozzle on the other. Depending on the control pressure, the spool valve moves, connecting and disconnecting the nozzle cavities. When there is no pressure in the main system, the spool valve is pressed by the spring to a position where the nozzle cavities are unloaded. The GA-59/1 automatic valve is designed to automatically activate the backup system to power the hydraulic boosters when fluid pressure in the main hydraulic system drops, as well as to shut off pressure in the main hydraulic system. When there is no pressure in the main system, the spool valve is pressed by the spring to a position where the nozzle cavities are unloaded. The valve spring is adjusted so that when the pressure in the primary system rises to (35 ± 5) kgf/cm², the spool moves, opening the cavities of the nozzles. Then, fluid from the backup system pump flows through the GA-59/1 valve to the drain tank through the nozzle. The pump operates in idle mode. When the pressure in the primary system drops to 30 ± 5 kgf/cm², the spool, under the force of the spring, moves, opening the cavities of these nozzles, and the backup system begins operation. Model was created in Siemens NX.

格式
STEP / IGES、Rendering、Text file
分类
Aviation、Industrial design、Machine design
标签
aviation、flow、pressure、helicopter、hydraulic、spool valve、backup system、hydraulic system
数据更新
2026-11-20T05:42:02Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。