GrabCAD 模型信息
Ultimate Magic Wand with Tricks (200mm) · 模型 257898
WIP -Photos of tricks to come, and anything else I can think of... This is the Ultimate Kids Magic Wand !! By reading further you must agree to keep the magic secret (but it can be told to your apprentice...) Do you agree? Well do you? Are you sure? Ok I take it that you have thought long and hard about it, and have agreed! Wahoo !! Welcome to the other side of Magic! Building your 'Wand'! This is the ultimate magic wand and tho it may look like 3 wands to the untrained eye all magicians know it is really the same wand. ;) Things to Note: Parts have been made to fit firmly in most cases, a slight sanding, drill or glue may be required. (dependent on your printer) **Construction wand 1** Printed Parts: 1x Wand Body 2x Standard End 1x Tight Fit Tip 1x Soft Fit Tip 1x Plug Parts: Elastic (Looped multiple time for strength) or Jelly Elastic 1mm 1 X Tubular magnets 4mm x 4mm Glue (for magnets) Hint: Feed elastic through once then back up, stretch thread and tie off (must be a firm fit) Elastic seems to bounce back nicer but frays a bit after some use (Jelly Elastic may not to bounce back as nicely but won’t fay) **Construction wand 2** Printed Parts: 1x Wand Body 1x Standard End 1x Hollow End 1x Tight Fit Tip 1x Soft Fit Tip 2x Magnet Holder 1x Plug Parts: Elastic (Looped multiple time for strength) or Jelly Elastic 1mm 3 X Tubular Magnets 4mm x 4mm Glue (for Magnets) Tinsel 5mm x 5mm or something Shiny Hint: Feed elastic through once then back up and tie off (must be a loose fit) Make sure poles of magnets are the correct way around before gluing…. yeah oops **Construction wand 3** Printed Parts: 1x Mini Body 2x Mini Tip Parts: glue Stick: Printed Parts: Stick Hint : This isn't required as you can use a pencil instead The Magic! Bellow are just a few tricks than can be achieved with this 'Wand' but of course this is just the beginning **Trick 1 Growing wand** Required: watch or band long sleeves Small purse with hole in Bottom corner Wand 1 Mini wand Setup: Cut small hole in back corner of purse or box (to fit Wand 1) Tuck Wand under watch band Trick: Small Wand is placed in purse and a big wand is pulled out of small purse How to: Show off small wand which is too small for Big Magic Pick up purse and place hole corner over hidden wand Place small wand in purse Pull big wand through hole and out of purse Magic! Accept the adoration of your audience and any goats that are offered. **Trick 2 Floating wand** Required: Wand 1 o...
- 格式
- STL、Other、Rendering
- 分类
- 3D printing、Hobby、Toys
- 标签
- wand、tricks、magician、magic
- 数据更新
- 2026-09-10T12:40:01Z