Ventilato (Ambubag ventilator) 模型预览

GrabCAD 模型信息

Ventilato (Ambubag ventilator) · 模型 338370

作者:Christophe Hopchet

The design is made to work with an Ambubag, which is placed in the middle of the base. On the top of this base there are two motors which are placed on opposite sides of the Ambubag. These motors each drive a rack and pinion system which will push the air in and out of the Ambubag. In order for the racks to slide easily and not tip, they are each mounted on a rail system. By means of a touch screen it is then possible to set the speed and movement of the motors. This way a specific volume and pace can be selected for the air coming out of the Ambubag. All these settings are processed by the controller, which is placed inside the base. The Ambubag itself contains an off the shelf part to set the PEEP. The base has been designed to be used with both the adult (700ml) and paediatric (450ml) Ambubag. In order to swap the type of Ambubag, the operator just needs to switch the front and back panel to the desired slots in the top and bottom panels of the base. The Ambubag is secured onto the base by putting tiewraps trough the holes at the inlet and outlet of the Ambubag. The powercable passes through the hole on the side of the base.

格式
SOLIDWORKS、Rendering
分类
3D printing、Machine design、Medical
标签
covent19round12020
数据更新
2026-10-30T01:40:31Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。