Voron V0 PC4-M10 (Male) ToolHead MOD 模型预览

GrabCAD 模型信息

Voron V0 PC4-M10 (Male) ToolHead MOD · 模型 393235

作者:Third Eye Labs

Tool Head modification for Voron The modifications are to replace the pushfit ECAS connector with a PC4-M10 Male Straight Pneumatic Tube Push Fitting Connector for Voron V0 ( V6 Threaded hotend). An added advantage of this mod is that the filament now enters the hotend in a straight line rather than the original design which has the filament entering the hotend at an angle. 3D Printer Slicer Setting: 1. Infill: 40% 2. Infill Pattern: Grid, Gyroid, Honeycomb, Triangle or Cubic 3. Layer Height: 0.2 mm 4. Extrusion Width: Forced 0.4 mm 5. Wall Count: Minimum 4 6. Solid Top/Bottom Layers: Minimum 5 For Installation guide follow as per the guidelines given in Voron V0.0 manual. No extra modification is required on the Voron. https://3rdeyelabs.io

格式
STL、Fusion 360、STEP / IGES
分类
3D printing、Components、Hobby
标签
e3d、pushfit、pneumatic、connector、hotend、voronv0、voronv0-0、mount、3dprinter、toolhead、3rdeyelabs、printer、3d、voron、colorfab
数据更新
2026-11-07T18:16:23Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。