GrabCAD 模型信息
Watch Strap TF Holder with Tap to Pay 3.0 · 模型 121738
This is some minor upgrades to a previous project I uploaded to grab cad. Print settings (Polypropylene) PP (polypropylene) • Bed Temperature : 80°C • Extruder Temperature : 230°C • Printing Speed : 15 mm/s • Chamber temperature : 60°C • Keep cool and dry : (25)°C (away from UV light) • Only sticks to itself (use packing tape) The first upgrade was to fully embed the card chip to the TF holder design. This change makes it so that no one can tell a chip is inside until you use it. The other minor upgrade was to change the filiment color to better suit the watch and to better conceal the chip inside. Instructions of how to embed the chip : - wait for the first three layers to print and pause the print - administer a light coat of glue from a caustic to the top side of the chip - place the chip in the slot and make sure it is firmly in place - resume the print and make sure that that the chip stays in place - let the print complete and remove the print. For post processing the holes in the parts may need to be opened up and cleaned. After cleaning threading the holes is a must before assembly. To three the holes just forcefully screw the screws through a smaller hole.
- 格式
- Rendering、Parasolid
- 分类
- 3D printing、Just for fun、Tech
- 标签
- 未标注
- 数据更新
- 2026-09-10T12:14:50Z
