GrabCAD 模型信息
Working concept of a four stroke engine · 模型 79728
Four Stroke Cycle Engines A four-stroke cycle engine is an internal combustion engine that utilizes four distinct piston strokes (intake, compression, power, and exhaust) to complete one operating cycle. The piston make two complete passes in the cylinder to complete one operating cycle. An operating cycle requires two revolutions (720°) of the crankshaft. The four-stroke cycle engine is the most common type of small engine. A four-stroke cycle engine completes five Strokes in one operating cycle, including intake, compression, ignition, power, and exhaust Strokes. Intake Stroke The intake event is when the air-fuel mixture is introduced to fill the combustion chamber. The intake event occurs when the piston moves from TDC to BDC and the intake valve is open. The movement of the piston toward BDC creates a low pressure in the cylinder. Ambient atmospheric pressure forces the air-fuel mixture through the open intake valve into the cylinder to fill the low pressure area created by the piston movement. The cylinder continues to fill slightly past BDC as the air-fuel mixture continues to flow by its own inertia while the piston begins to change direction. The intake valve remains open a few degrees of crankshaft rotation after BDC. Depending on engine design. The intake valve then closes and the air-fuel mixture is sealed inside the cylinder. Compression Stroke The compression stroke is when the trapped air-fuel mixture is compressed inside the cylinder. The combustion chamber is sealed to form the charge. The charge is the volume of compressed air-fuel mixture trapped inside the combustion chamber ready for ignition. Compressing the air-fuel mixture allows more energy to be released when the charge is ignited. Intake and exhaust valves must be closed to ensure that the cylinder is sealed to provide compression. Compression is the process of reducing or squeezing a charge from a large volume to a smaller volume in the combustion chamber. The flywheel helps to maintain the momentum necessary to compress the charge. When the piston of an engine compresses the charge, an increase in compressive force supplied by work being done by the piston causes heat to be generated. The compression and heating of the air-fuel vapor in the charge results in an increase in charge temperature and an increase in fuel vaporization. The increase in charge temperature occurs uniformly throughout the combustion chamber to produce faster combustion (fuel oxidation...
- 格式
- PTC Creo Parametric、STEP / IGES、Rendering
- 分类
- Automotive、Components、Educational
- 标签
- car、valve、bike、engine、shaft、crank、piston、rod、connecting、intake、four、stroke
- 数据更新
- 2026-09-29T05:18:18Z
