GrabCAD 模型信息
Z-Style Parts Conveyor · 模型 281722
Dorner Parts Conveyor 10" Belt Width 9'1" Length 24" Entry Height 72" Eject Height 45° Up-rise Angle ***Special thanks to https://grabcad.com/dhananjay.rehere-1 for the render*** http://www.dornerconveyors.com/ 3200 Series T-Slot side rail cleated modular belt, Z frame Inclining LPZ Conveyor 10" (254mm) nominal width, with a L1 horizontal discharge module, 2' 6" (762mm) long with standard discharge tail, drive shaft in position A, 45 degree L2 mid module, 5' 8" (1727mm) long. Horizontal L3 infeed module 2' 6" (762mm) long with standard infeed tail, type 3-3" (76mm) bolt on inset high side profile. Plastic chain is type NH flush grid (open mesh) polypropylene with 3" (76mm) tall cleats on 10" (254mm) centers. Note: Usable chain width is 7.25" (184mm). Depending upon belt width, each individual cleat may consist of multiple pieces. Conveyor overall horizontal length is 9' - 0.1" (2745mm) as configured. 1 32MBPSA-1616 3200 Series standard load bottom motor mounting package for an end drive conveyor, mounted in the A position, 16:16 pulley ratio. Uncrated weight = 11 lbs. (5 kg). 1 62M060PS423FN 3200 Series standard load parallel shaft gearmotor, .17 Hp (.13kW), 230/460 volt, 3 phase, 60 Hz, 28 RPM, providing a belt speed of 29 ft/min (8.8 m/min). Order 3 phase starter separately. Uncrated weight = 15 lbs. (6.8 kg). 1 62MM23L Manual motor starter, 230V, 3 phase, 1.0-.1.6 amps. Includes wiring to motor, wiring to starter by others. Uncrated weight = 3 lbs. (1.4 kg). 1 75M-LT-1 Lockout / Tagout kit. 1 39HMFH10-7074F Fixed height stand with fixed foot pads for a 10" (254mm) wide 3200 L1 flat discharge module. Stand is adjustable from 70" to 74" (1778mm to 1880mm) with a base width of 13.5" (343mm). Stand must be lagged (secured) to the floor. Required stand height is 72" (1829mm). 1 39HMFH10-4650F Fixed height stand with fixed foot pads for a 10" (254mm) wide 3200 L2 angled mid module. Stand is adjustable from 46" to 50" (1168mm to 1270mm) with a base width of 13.5" (343mm). Stand must be lagged (secured) to the floor. Required stand height is 48" (1219mm). 1 39HMFH10-2226F Fixed height stand with fixed foot pads for a 10" (254mm) wide 3200 L3 flat infeed module. Stand is adjustable from 22" to 26" (559mm to 660mm) with a base width of 13.5" (343mm). Required stand height is 24" (610mm). 1 39MB-TT Diagonal bracing for 3200 Series modular belt conveyor with two-legged H or A style stands over 30" (762mm) tall. 2 39...
- 格式
- STEP / IGES、Rendering、Other
- 分类
- Fixtures、Machine design、Tools
- 标签
- dorner、manufacturing、industrial、design、fixtures、conveyor、machine、tooling
- 数据更新
- 2026-11-06T06:09:03Z