GrabCAD 模型信息
3D Printed Mask with Extra Sealing · 模型 199183
3D Printed Mask (with Extra sealing) – Product details This guide (PDF available in files section) will take you through all the informations needed for the 3D Printed Mask designed by FredSWUG and then modified and improved by Emanuel Enasoaie, which serves as personal protection in case no other option is available. The idea was to make a 3D printed mask that ensure the sealing with the face and not making just a ripoff mask that’s look nice or it is made to sell ultra expensive filament for no reason. Before starting, you will need the next RAW materials: PLA and TPU/FLEX filament, makeup cleaning disks or air purifier HEPA Filter and a strong adhesive (super glue). WARNING: The design does not guarantee you 100% safety but it’s better than nothing. For full protection, buy a certified masks. The mask is divided in 3 main parts: 1. The Mask itself, 2. Cartridge and 3. Face Sealing All the project files can be found at the next link: GoogleDrive For the project, it has been used Solidworks 2020. All the needed files will be found in the archive: SW files, Step format of the project, preconfigured 3MF files for Prusa i3 MK3S, even renderings of the project or GCODES. This is a true Open Source project where I put all the existing files at your disposal. As you can see, only in the cartridge, there are 4 gaskets (blue elements) that are squeezed together to have the best sealing possible. Initially (as you could see in Figure 2, the cartridge was much smaller but due to weak air flow, it has been increased from 35mm to 50mm in diameter. There will always room for improvement. The cost should be as cheap as possible and doesn’t require things that are hard to get these days. (taking into account that people have gone nuts on some items….).
- 格式
- Rendering、SOLIDWORKS、STEP / IGES、Other
- 分类
- 3D printing、Medical、Miscellaneous
- 标签
- pandemy、filter、with、covid19、coronavirus、printed、3d、mask、face
- 数据更新
- 2026-10-14T17:29:15Z
