GrabCAD 模型信息
Blackboard Challenge AM_01 · 模型 200923
The concept here was to meet as much of the criteria s possible as listed below; Contactless Credential - Here I tried to make it ergonomically friendly by placing it an angle to the mounting service. I made the assumption of majority 'right hand users' although still usable by both Mag Stripe - Here again I placed it an angle. Although the key feature was to have it optional with a 'blank' component where not needed but still to occupy the space Pin Pad - All the keys with braille incl. Optional again with a blank cover plate where not needed. Audible feedback - Included, I tried to keep the Audio&Visual close together. Visual feedback - Power, entry, denied, lights. Angled and shaped to fit with angles to match Mounting - Here I took a leap of faith, not being a fan of 'Tamper proof' screws as technicians often don't have the tool with them, I decided to take a mechanical route: Mount the first baseplate(with protruding tags) using wall plugs/rawl-bolts/Hextech etc. Take either complete unit or secondary baseplate only and use the 'Roadmap'(consisting of certain movements) to locate/mount it into place. The ASSUMTION being that not knowing the correct 'Roadmap' you won't be able to remove the unit. Mounting option 1 - as mostly described above Mounting option 2 - first baseplate includes holes matching a 2x4 gangbox. Magstripe and original pc board does not allow to much in the realms of 'flush-mount' Mounting option 3 - Only difference here is to make a universal spacer that can go around various mullion sizes(to be cut on site?) Thereby filling the gap on either side, assuming a center-mount? Mounting option 4 - I thought to create a pole mount for around turn-tyle gates. Again a universal sorts will be needed. Optional protective visor - Included, also serves as a gasket between 2 mounting plates. Where not needed a gasket will be introduced in the assembly. Additional design considerations - I've tried to break away from the norm without compromising the function too much. With regard to the 'no keypad option' perhaps the cover-pate could be a printed panel with company logo? I think in terms of colours etc. there is still a lot that can be refined. With above being said, I'll keep updating more renders and images, hopefully explaining things better visually. As always,thanks for the opportunity, what a challenge, indeed
- 格式
- Rendering、Rhino、STEP / IGES、STL
- 分类
- Fixtures、Industrial design、Tech
- 标签
- opensesame
- 数据更新
- 2026-09-14T11:19:16Z
