GrabCAD 模型信息
Bottom-Feed Sheet Dispenser Assembly (Shell, Dovetail Plate, Notched Gate Slider) · 模型 336369
FDM assembly for dispensing flat 70 x 110 mm sheets one at a time. Shell: 113 x 79 x 80 mm cavity, 3.5 mm side walls, 3 mm floor and front. Printed front face down so the 3 mm full-width dispensing slot is formed in the first layers with no bridging. A teardrop scoop in the floor (45 degree tip) gives finger access to the bottom sheet behind the gate. Gate: a solid 2 mm plate (about 22 g) in chamfered grooves behind the front wall, with a lip along the top that covers the slider. It hangs on two V-tipped pins that rest on a slider, a 2 mm bar with two runs of eight 90 degree V notches riding on a ledge just above the slot. Moving the slider 4 mm sideways drops both pins into the next notch and sets the next gap (0.4, 0.5, 0.6, 0.8, 1.0, 1.2, 1.5, 2.0 mm). A tab through the front wall moves it. A 1.2 mm spring arm on the slider presses a bump into one of eight dimples on a rail behind the front wall (0.2 mm preload), so the setting holds under vibration. The slider's ends meet the side walls just past notches 1 and 8, so the tab never takes the end-stop knock. Notch and dimple profiles are in-plane on a flat print, so they hold tolerance on most printers. Mount: 45 degree dovetail flanges on the shell's back edges engage rails on a 4.4 mm plate, with a bottom ledge. 0.3 mm running clearance. The shell lifts off vertically. Tear sleeve: 2.4 mm slot, 55 mm deep, serrated outer edge, for halving a sheet. A 15 mm round hole in the outer wall lets a fingertip push the leftover half back out. Sized for the laundry sheets at Filthy Clean. Files: STL per part (print orientation), multi-colour 3MF. No STEP. Checks run: all parts watertight and single-body, gap measured off the mesh at all eight notches with the gate seated on both pins, spring preload measured at every notch, tear depth ray-cast at 55.0 mm, no part collisions, dovetail locks forward and sideways. Untested in print. Feedback welcome. Filthy Clean, CC BY 4.0 intent (credit Filthy Clean). Trademarks excluded.
- 格式
- STL、Rendering、3D Manufacturing Format
- 分类
- Household
- 标签
- dispenser、dovetail、fdm、assembly、household、sheet feeder
- 数据更新
- 2026-11-10T06:37:48Z