GrabCAD 模型信息
Community Face Mask Frame · 模型 171493
Simple DIY mask with flexible filter media options. Three sizes available; small, medium and large. Use string, elastic cord, rubber bands, or other options to secure to head. anchors around the frame are very handy to wrap string around for a snug fit. Mask frame will conform under tension, or can be heated and formed to the face. ****Ultimate goal is a low cost, fast printing, simple face mask with flexible filter material options that could be reused or discarded.**** "Make everything as simple as possible, but not simpler." Einstein Videos: Community Face Mask Frame Overview : https://youtu.be/p5XY0dPUb0A How to attach filter material: https://youtu.be/ZKg6S_APZag Forming Community Face Mask with a 3D Printer: https://youtu.be/wVRS_5bWIiw How to Cut Filter Material : https://youtu.be/s5m0jBjp0ow This is a very fast print at 14 minutes for the large sizes. Two larges, three mediums or three smalls can fit on a standard 200mm X 200mm build plate. ABS and PLA are both acceptable materials to print with. Note: This mask is not as effective as a N95 HEPA, MERV 16, etc. but this is better than nothing. How to form the mask frame to the face (PLA) Option 1 (3D printer bed) 1) Heat 3d printer bed to 65-75C 2) Place mask frame on bed 3) Wait 10-20 seconds or until frame is mold-able 4) Press mask frame against face. Allow frame to cool Option 2 (hot water) 1) Boil water 2) Place mask frame in water 3) Wait 10-20 seconds or until frame is mold-able 4) Remove frame with tongs. Water is very hot, do not use hands 5) Press mask frame against face. Allow frame to cool Option 3 (Heat gun or blow dryer) 1) Set Heat gun to low or Blow dryer to high 2) Heat mask frame until it is mold-able. (5-15 seconds?) Move heat source around the whole time. 3) Press mask frame against face. Allow frame to cool Check out this link for more information about Best Materials for Making DIY Masks https://smartairfilters.com/en/blog/best-materials-make-diy-face-mask-virus/?fbclid=IwAR28ZtZP3utwGHE1hmqXdoeqxgHMpWmtT5lhNYXB1I33hURVa_j-pnDd7jo CDC Guidelines for Homemade mask https://www.cdc.gov/coronavirus/2019-ncov/hcp/ppe-strategy/face-masks.html Videos: How to form Diy Face Mask to Face : https://youtu.be/wVRS_5bWIiw Please provide feedback and picture The Solidworks files are open for modifications. All I ask is to reference this design :-) Update: * 3/22/2020 FACE MASK REV2 uploaded 1) Now is three sizes ( Small Medium and Large) 2) Thinner Fra...
- 格式
- SOLIDWORKS、STL、Other、AutoCAD、STEP / IGES、Rendering
- 分类
- 3D printing、Medical、Tech
- 标签
- cfmf、cfm、frame、community、reusable、surgical、make、protective、sew、how、masks、6markfuller、2robotguy、homemade、simple、printing、printer、3d、covid-19、montana、cnc、print、face、diy、covid、covid19、mask
- 数据更新
- 2026-09-12T21:39:51Z
