GrabCAD 模型信息
Electric plane Евріка - AIRBUS is nervous :) · 模型 109575
My thanks to Karri Koivusalo - I used his Cobra https://grabcad.com/library/cobra-flight-grip-1 Евріка - Eureca in Ukrainian The prototype of this aircraft, for example, is here https://en.wikipedia.org/wiki/Airbus_E-Fan ... But there are some features My plane is also training, but it is single-seat - the instructor is on the land. The instructor has a remote (radio) control and at any time he is ready to correct the cadet's mistake or completely take control of the aircraft. Cameras in the cockpit allow you to see what the cadet sees, as well as to see the cadet’s face (his physiognomic reaction), if this is agreed with him previously. On-board batteries (Kokam) have a capacity of about 30 kWh, in addition, there can be 2 blocks of 9.6 kWh on the external sling - they will be consumed first and then can be dropped by parachutes - this will make the aircraft easier by 80 kg. The aircraft is equipped with 2 EMRAX 208 electric motors of 30 kW each at 4000 RPM - this allows the use of propellers with a diameter of 1.2 m without gearboxes. Fixed pitch propellers. The motors are located at the ends of the V-shaped tail unit - and no part of the aircraft is in the stream from the propellers. Estimated flight weight up to 500 kg (without outboard batteries). The aircraft is equipped with a rescue parachute (commissioning is possible by a pilot on board and an operator on the land, additional batteries must be discarded). Cabin equipment is quite understandable from the model. There is a feature in the design of the chassis. All three supports are composite springs, which in the "Up" position are integrated into the outer skin of the aircraft, and in the "released" position are at an angle that provides the necessary cushioning. The main wheel covers are made of flexible material (e.g. polyethylene). The wheels of the main chassis have electromagnetic brakes ... but it also has electric motors! - it provides economic movement on the airfield. I did not make any calculations. The whole project is just improvisation. There were several options, I chose, it seems to me, the most interesting. I used Autodesk Inventor 2021 in test mode. The assembly structure is only symbolic: all components are together, there are no relationships. The *.stp file contains the chassis in two positions ... I didn’t do the animation - I think this makes no sense (The publication is designed for "gourmets" :) The project is in development - it will be even more interesting.
- 格式
- Rendering、STEP / IGES、AutoCAD
- 分类
- Aerospace、Aviation、Energy and Power
- 标签
- 未标注
- 数据更新
- 2026-10-06T05:55:00Z
