GrabCAD 模型信息
Handle extionsion for Goodbaby Pockit baby stoller · 模型 321421
This is an extension for the handles of the too low but otherwise great Pockit baby stroller. This file contains the left handle, but it can be mirrored to print the right hand side as well. The printing orientation is shown in one of the images. I've printed it on a Prusa MK2S in PLA without any problems. Support: Yes Perimeters: min. 5 Infill: 30% Layer height: 0.2mm To slip the part over the strollers handles I suggest to heat up the thin bit in the front with the hot steam of a water boiler to soften it up and quickly apply it. With PLA the two M2 screws + nuts will not be enough to hold the handle. I recommend to add one or two zip ties to really hold it together. The PLA will still deform over time, but the zip ties can just be replaced. There's also a plastic loop on the back side that can be used to attach a bag of sorts. I made one from fabric to hold bottles and diapers.
- 格式
- STL、Rendering
- 分类
- 3D printing、Industrial design、Miscellaneous
- 标签
- pockit、goodbaby、stoller、pram、handle、extension
- 数据更新
- 2026-10-15T06:04:22Z