GrabCAD 模型信息
HensNest v2 · 模型 294945
The HensNest About the Design The HensNest was created to address some of the most pressing issues with current face mask hacks. It was inspired by both The NanoHack by Copper3D and the DIY Face Mask by Mark Fuller. The HensNest has a flexible printed hoop frame that conforms to the face without post-processing steps, like using a heat gun or applying a sealant. The filter surface area is very large, addressing issues with the breathability of hard-sided mask designs with small filter towers, like The NanoHack. The HensNest adds a tented structure to the design that keeps the filter surface away from the mouth and nose, which we learned from our clinical collaborators is critical for keeping the filter dry and functional during extensive use. Lastly, this design is mostly planar and is fast and cheap to print. If you have design improvement suggestions, please post to the comments section below. Release Notes for v2.0 The v2.0 HensNest design is production ready and includes complete assembly instructions. We are continuing to make minor tweaks to the design and will update these release notes as we progress. 1. DESIGN MODIFICATIONS: HensNest v2.0 features two important design improvements from v1.0, namely, (a) an interior retaining ring that secures the filter in place; and (b) ergonomic improvements to the lofted wireframe to fit more comfortably around the nose while holding the filter material further from the face. 2. FILTER MATERIAL: We have been experimenting with several commonly available filter materials, and our current recommendation is to use one ply of a (clean!) furnace filter. We recommend higher performance filters like 3M Filtrete Ultra Allergen Air Filters, which have an MPR rating of 1500. We are still in the process of respirator fit testing this design, and we will release these results as soon as they are available. 3. SECUREMENT STRAPS: Current assembly instructions for HensNest v2.0 incorporate household rubber bands to secure the mask to the face. We present both a 4-point and 2-point securement option, with the 4-point being more strongly recommended. We recognize that comfort is a priority for longer duration use of the mask, and we are presently working on slight design modifications to improve the comfort of the securement straps. Release Notes for v1.0 We released HensNest v1.0 to give the maker community a chance to further “hack” our improved wireframe design. We will continuously release design improvements and upda...
- 格式
- SOLIDWORKS、STEP / IGES、STL、Rendering
- 分类
- 3D printing、Industrial design、Medical
- 标签
- 未标注
- 数据更新
- 2026-09-13T07:56:28Z