NASA contest entry 模型预览

GrabCAD 模型信息

NASA contest entry · 模型 336473

作者:Eliana Lippa

This is a .stl file of my entry to the NASA Regolith Advanced Surface Systems Operations Robot (RASSOR) Bucket Drum Design Challenge. It has 4 scoops in action at any given time, each with a width of 27.5mm. It has a length if 250 mm and a diameter of 450mm. The drum uses a wall to separate the scoops, this makes it easier to avoid large blockages .only small rocks and dust will fit inside. The scoops have a pointed end that prevents rock from leaving the inside of the drum. As it rotates the dirt fills the channels which the rotation uses to carry dirt to a scoop. It is very solid and will require work to open. It is loosely attached via suction to a 45mm in diameter axle. To remove the samples NASA would use the 45 mm hole in the drum to empty it. The drum would be 3D printed in titanium. The reason for 3D printing would be to make the drum detailed. The reason for titanium is to make it strong enough to survive scratches. 3D printing also would allow the print to be lighter by using infill of a lower density.

格式
STL
分类
3D printing、Aerospace、Machine design
标签
nasadrumchallenge
数据更新
2026-10-30T11:59:30Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。