GrabCAD 模型信息
NASA Regolith Drum E1 · 模型 164589
Here’s my entry for the “NASA Regolith Advanced Surface Systems Operations Robot (RASSOR) Bucket Drum Design Challenge” found here: https://grabcad.com/challenges/nasa-regolith-advanced-surface-systems-operations-robot-rassor-bucket-drum-design-challenge Ideally a single solid titanium print body with no assembly, my design features exterior and interior features to dig, pulverise, grade, and contain regolith during gathering and depositing. There are four section traps with each section containing three scoops, so twelve scoops per drum; four-drum configuration would have mirrored parts and features. This design is intended to take step-cuts into the regolith in a left-to-right series that forces regolith into containment,or push excess debris to the outwards from the RASSOR vehicle, and kicks larger debris forward and clear of the current dig path. Maximum total width of scoops engaged at any given time: 88 mm per drum Maximum bucket drum mass: 4.73 kg Maximum bucket drum diameter: 450 mm Maximum bucket drum length: 360 mm A minimum volume of regolith captured: TBD Included in the download: Simulation visualized using animated GIFs, a few Hero renderings, a quick drawing ...and of course... SolidWorks, STEP, and STL 3D files. Thanks for checking it out! Links to my other entries for this challenge: https://grabcad.com/library/nasa-regolith-drum-e2-1 https://grabcad.com/library/nasa-regolith-drum-e3-1
- 格式
- STL、STEP / IGES、Rendering、SOLIDWORKS
- 分类
- 3D printing、Aerospace、Robotics
- 标签
- nasadrumchallenge、rassor、drum、titanium、challenge、nasa、mueller、tommy
- 数据更新
- 2026-09-17T19:46:34Z
