GrabCAD 模型信息
Neurotrac Labour TENS Machine · 模型 203095
Dual channel: individually isolated circuits. Amplitude: 0-80 mA into 500 Ohm load ; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 70 mA, at 1500 Ohms load the maximum will be limited to 65 mA. Type: Constant Current, maximum output voltage 180 Volts +10 / -30 Volts. Waveform: Asymmetrical, rectangular bi-phasic with zero DC current. Pulse width: 220μS [2% accuracy]. Pulse Rate: 90Hz (Continuous mode) [2% accuracy]. Mode: Continuous (Boost mode). Burst mode: Bursts of 9 pulses [200 μS] at 150 Hz, repeating twice every second (Rest mode). Ramp up Time: 0.8 seconds from Rest to Boost. Time duration: continuous until switched off. Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second. If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on. Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero. Physical dimensions: 108 x 62 x 23 mm. Weight: 0.09KG without battery, 0.14KG with battery. Environmental Conditions for use: +10 to +30 degrees Centigrade. 0-90% Humidity. Environmental conditions for storage & transport: -10 to +50 degrees Centigrade. 0-90% Humidity.
- 格式
- Snagit、STEP / IGES、Rendering
- 分类
- Machine design、Tech
- 标签
- 未标注
- 数据更新
- 2026-09-28T08:17:01Z
