GrabCAD 模型信息
Open Sesame Challenge Preliminary Design proposal (Concept_vers1)1 · 模型 322597
The design intent here was to focus on keeping a consistent and similar design with some of the other winning entries chosen in previous Blackboard challenges. It’s important to build a brand by having some design similarities among the product families. Since this is another card reader device, I’ve used Blackboards handheld reader (designed by David Franklin, from here on GrabCad, https://grabcad.com/library/bb-transact-1) as inspiration for this design. I tried to incorporate some of the design and style cues of his design while adding my own flare and innovation. If you were to look at the two products side by side, you would know that they belong the same product family or company. Just like you can tell that a Logitech product is made by Logitech even though they might be completely different things with different functions. I only realized that the antenna was going to be sandwiched with the main board after this design was finished. So in this case, I have designed it with the antenna as a separate board to the left. I have made a revised vers that I will add later that will have the revised, more accurate architecture with the sandwiched board. The designs and files I am offering are NOT JUST PRETTY surface models, all of my designs and model files are basically ready to mold, I design them as accurately as I can. There might be a need to change a few screw holes around, move a few ribs here and there, add a fillet or two, to meet your needs but otherwise they are designed with drafts and molding in mind. When designing this, I reflected on the design considerations and tried to address all of them. Obviously it’s a beautiful design, but I also have considered its DURABILITY, RESISTANCE TO VANDALISM, ENVIRONMENT. I will explain further below, AND I also invite you to review the slides for better visual reference. DURABILITY I used .07” main wall thickness on the bottom half and .065” on the cover. These are descent thicknesses and a good balance between cost and durability. The weather protection guard is to be molded of durable rubber, it’s flexible and durable, it won’t crack or break. VANDAL RESISTANT The concept here is to use a custom aluminum backing plate as your foundation plate, this can be adapted any surface and it is screwed in place with special tamper proof screws(size m5or m6). Prior to this plate being installed, from behind, screws are inserted through the plate and bottom half of the c...
- 格式
- STEP / IGES、STL、Rendering
- 分类
- Components、Industrial design、Tech
- 标签
- door、panel、card、magnetic、reader、access、strip、opensesame
- 数据更新
- 2026-10-28T00:46:32Z