GrabCAD 模型信息
PrimseSense Carmine RGB-D Laser Scanner Webcam and Printable Wand · 模型 329574
Camera designed in Solidcraft (its a free Fusion/Solidworks clone). the .igs file needs to be renamed to .sc to access the solidcraft design file, as GrabCAD doesn't yet support SolidCraft files. Wand with 90 degree rotating camera mount designed in Rhino 8. Wand assembly requires hardware: (M5x25 SHCS + washer + nut) and (M3x12 SHCS + washer + nut). STP of all files included, 3MF included. see images for more information. Hanlde Assembly: remove the camera base and harware by popping the hinge caps off and unscrewing the phillips head screw. remove the trapped nut and axle sleeve. slide the camera tangs down into the printed 3 tangs, routing the cable through the slot in the circular back. insert the M5 hardware to capture the camera against the part. Route the end of the cable down through the handle, pull the parts together. when the smaller print reaches the handle front face, rotate it so the ears match the cutout. rotate into landscape or portrait orientation, and drop the M3 nut into the nut trap on the top of the handle, place the washer on the m3 screw, and screw it into the trapped nut via the hole. this ensures the parts can not be pulled apart again. assembly is complete. the Carmine 1.09 scanner uses OpenNI2 drivers and can be used in a small variety of 3d scanning applications. none of them are amazing, buut its a very cheap 3d scanner. I bought mine on ebay for $22 after shipping. Applications that I know support it, not all are free or easy to "find the right versions of": Skanect, RecFusion, ReconstructMe, KScan3D, Dot3D.
- 格式
- Rhino、STEP / IGES、Rendering、3D Manufacturing Format
- 分类
- 3D printing、Tech
- 标签
- 3d scan、scanner、openni、openni2、3d scanner、primesense、prime sense、diy、lidar、depth
- 数据更新
- 2026-11-12T16:46:02Z