GrabCAD 模型信息

PRUSA Covid-19 / Coronavirus Face Shield With Integrated Folding Detent Strap · 模型 199244

作者：Chris

UPDATE 13/04/2020: NEWEST VERSION HERE: https://youtu.be/04lTMJ2VdTI UPDATE 03/04/2020: Drill guide added for clear face shield. Continue to use A4 (8.5"x11") clear PETG shield, ~0.5mm thick. You can download and print the drill guide. Align with long edge of sheet and drill out holes (1/4", 6mm, 7mm drill bit should work). You can stack several sheets and drill all at once. Put some wood or something under so you don't drill into your table. In this video I show you my revisions to the popular Prusa 3D printed Covid-19 / Coronavirus face shield. I noticed some areas that I thought could be improved with the original design. The biggest one was the requirement for some kind of elastic strap in the back. I don't believe it is something that people have around the house and it is an additional component that is required in the assembly of the face shield. I designed the strap to be a "print in place," captive feature that is ready to go off the print bed with no assembly and no hardware required. You simply remove the limited amount of support required and just work the strap back and forth a few times to get the detent feature free and you will notice the straps snap into many different positions. When wearing the straps at the back of the head, you can angle them to pull the mask closer to your face. I found that the original design kept the mask at too steep of an angle, exposing a large area under the face shield. The straps should accommodate a large variety of head sizes, and the smaller holes work well if you choose to use the strap on top of your head. If you wear the straps on top of the head, you can still attach an elastic in the vertical slots, or get creative and use Velcro strips or even simple zip ties. This face shield requires a front foam piece, otherwise it can be uncomfortable to wear for long periods of time. I am using off cuts of acoustic panel foam because it is what I had in the house here. You can weave the foam through the hexagonal openings on the forehead piece. You can also use paper towels, or cut up t-shirts, etc. These items should be single use as they are porous and very difficult to properly sanitize. Print directions: ► Material: PLA+ ► Layer height: 0.3mm ► Support: Only on build plate, do not support bridges. These options are important to make the detent feature work correctly! Assembly: Just remove the supports and attach the PETG face sheet. The sheet should be 0.5mm thick and the size of an A4 piece of...

格式

STL、Rendering、Other

分类

3D printing、Medical、Miscellaneous

标签

rc2、mask、coronavirus、covid-19、covid、shield、face、prusa

数据更新

2026-09-10T09:31:23Z

前往 GrabCAD 查看