Rassor Bucket Drum Design improvement 模型预览

GrabCAD 模型信息

Rassor Bucket Drum Design improvement · 模型 329455

作者:Filip Šabacký

The bucket drum has 4 narrower drums with 12 pcs built-in stable sheets of different shapes inside the drum. The space between sheets is always bigger than 43 mm, so even the biggest regolith particles can move inside the drum. Intended maximum particle size of regolith is 40 mm. Intended fill ratio is 66 %. Design is real and can work. The design can be created by 3D printing or by spot welding. There are inner plates which increases retention time of regolith, and which slows down the falling regolith from the upper parts of drum to the bottom of the bucket drum. Made by Aluminum sheet 1 mm thick. Assembly hole 30 mm in diameter (unused volume). Front plates could be thinner than 1 mm due to inner plates reinforcement of the whole drum. Further simulation is needed for even better placement of inner sheets. Better shape and material of cutting edge of scoops is needed. The design can be further improved by using built-in sheets at a higher density (for example 18 pcs instead of 12 pcs). Maximum width of scoops engaged at any given time is 175 mm. Maximum Bucket drum mass is 4.5 kg (empty, without regolith). Bucket drum outer diameter is 450 mm. Bucket drum outer width is 350 mm. Two scoops are engaged at any given time. Total 8 scoops on bucket drum. Cross section dimensions of one scoop 85.5×44 mm (inner). Digging speed approx. 15 mm/s. Intended volume of regolith captured inside 22 liters.

格式
Autodesk Inventor、STEP / IGES、STL、Rendering
分类
Machine design、Tech、Tools
标签
rassor、nasa、regolith、bucket、drum、design、nasadrumchallenge
数据更新
2026-10-28T21:33:08Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。