GrabCAD 模型信息
Rexroth - Bosch Hydraulic Cylinder Tie Rod Design (Single Rod Cylinder - Series CD 120T) Cylinder Internal Diameter = 25 mm , Stroke Length S=200 mm · 模型 153096
The Rexroth tie-rod cylinder model number CD 120T could not be found in standard documentation. The "T" likely refers to a specific mounting style, but it is not a standard Rexroth code for commonly documented series . 🔍 Available Information on Related Tie-Rod Cylinders The "CD" designation is used for Rexroth tie-rod cylinders, and the general specifications from similar series are shown below as a reference: Parameter Specification Series Example CD70, CDT3 Design Tie-rod cylinder Nominal Pressure Up to 210 bar Piston Diameter Available in 25 mm Stroke Length Up to 3000 mm A specific example, the CD70P 25/16-0060, confirms a 25 mm piston diameter with a 16 mm piston rod for a 60 mm stroke . The 200 mm stroke you requested falls within the maximum 3000 mm stroke limit of these series. 🧭 How to Find Exact Specifications To locate the exact specifications for the CD 120T model: Verify the Mounting Style: The "T" most likely stands for a mounting style (e.g., foot, flange, trunnion). Confirming the type of mounting you need is crucial for selecting the right cylinder. Consult Official Documentation: The primary source for Rexroth tie-rod cylinders is the RE 17016 datasheet. A direct review of this document will provide the definitive list of available mounting styles and dimensional drawings for a 25 mm bore. Contact Rexroth Support: For the most accurate information on specific, potentially non-standard, or older model variants, contacting Bosch Rexroth directly is recommended.
- 格式
- Parasolid、Other
- 分类
- Industrial design、Machine design、Robotics
- 标签
- hydraulicsystems、fluidpower、200mmstroke、25mmpiston、cd70、hydrauliccylinder、tierodcylinder、industrialhydraulics、hydraulics、rexroth、boschrexroth
- 数据更新
- 2026-10-13T06:06:42Z
