GrabCAD 模型信息
Rod Pillar 1U Cubesat · 模型 308455
This is my Design, very less in weight and less part and it's effective for 3D / Addictive manufacture. __About this Design__ This design have 3 different wall but all are looking similar but slight change in each and face design is same. this i=has a rod pillar both ends are having square shape and in order to reduce weight the middle part of it become circle shape and it gives a great amount of strength. easy to assemble. you may combine the walls and use 2 faces as removable face. wall thickness is 1.25mm According to the Spec Weight need to be reduce (Density of material need to be less) Strength should be high (Young's modulus need to be high) so Performance Index M = (E/p(density)) and the material that are choose here For Pillars - Carbon Fiber (for high strength) For Chassis - Aluminium 4032-T6 (for high Elastic Modulus and other material properties such as tensile,yield,thermal conductivity ec. also the density of this Material is less therefor the weight of this model is reduce) Overall Weight -211.99 grams * This weight with bolt that are using for this, [*using pillar's rod as Titanium- Ti may cost but very hight material properties it has overall weight - 231.82grams ] Center Of Mass (mm) x=00.00 y=00.00 z=49.31 i hope this should be motivated, and i am still researching about this cubesats maybe later i'll able to upload some best models. and i have some clarification of this cubesats still, and upper and bottom part of this can be seperated and other are combined so easy to printing all faces are symmetrically and same faces so easy of printing this kind of Model we need to have apply lot of Engineering knowledge. Good Luck for all*
- 格式
- Rendering、STL、STEP / IGES
- 分类
- 3D printing、Aerospace
- 标签
- cubesat
- 数据更新
- 2026-10-30T05:56:42Z
