GrabCAD 模型信息
Suspended Load, Full Complement, Cageless Radial Bearing · 模型 170914
Last of several bearing designs I came up with back in late 2013 – early 2014. With this design, the load the bearing supports is actually suspended from its components rather than supported by them, so this approach is not suitable for applications where high radial loads are likely to be experienced. And any axial loads should be supported by an altogether separate axial bearing, which this bearing design should always be employed in tandem with, for those applications where any axial forces are expected. The bearing's inner track (the green ring in the renders) is the innermost component of the bearing and also has the smallest internal diameter. It is the only part of the bearing which comes in direct contact with the shaft the bearing is supporting (the inner diameter of the bearing's outer track is necessarily larger than the inner diameter of its inner track). Comprised of two symmetrical circular pieces (the cyan and magenta rings in the renders), the bearing's outer track is its outermost component and the internal diameter of its outer wall is slightly larger than the external diameter of the suspension ring (the red component in the renders – the next outermost part of the bearing), so as to achieve a slight gap between the outer surface of the suspension ring and the inward face of the bearing's outer track's external wall. Although it might not be readily apparent from the renders, the diameter of the bearing's outer track's innermost surface is larger (though not by a lot) than the diameter of the bearing's inner track's innermost surface. The load picked up by the inner track directly from the shaft the bearing is supporting is transferred to the row of shorter rollers (coloured yellow in the renders) immediately outside the inner track, which it rides on. These, in turn, transfer the load on to the second layer of rollers, which are the next innermost components of the bearing, further out from the centre of the bearing than the inner layer. This outer row of rollers, in turn, pass the load to the suspension ring which carries it to the top of the bearing, where it is then conveyed back to the outer rollers which then transfer it to the inward overhang of the bearing's outer track's halves. The bearing's load is thus suspended from these internal overhangs of its outer track, by way of the suspension ring which picks up the load from the bottom of the bearing and carries it to its top. The bearing employs two rows of rollers (whi...
- 格式
- Other、Rendering、STEP / IGES、KeyCreator
- 分类
- Industrial design、Machine design、Tech
- 标签
- suspension、suspended、cageless、multilayered、full、complement、radial、bearing、roller、rollers、rolling、element、needle
- 数据更新
- 2026-10-21T15:26:45Z
