GrabCAD 模型信息
Egg Drop Challenge · 模型 299336
Simplistic design for the egg drop challenge. (First pic has a transparent half to better explain what is happening) Grabby will be on the side making sure the egg is safe through its treacherous journey!! Large halves are printed with TANGOBLACK PLUS FLX980: (http://www.stratasys.com/~/media/Main/Files/SDS/Rubber-like-Materials/SDS-Objet-TangoBlackPlus-FLX980-US.pdf) Side clamps are printed with any FDM material: (http://www.stratasys.com/materials/material-safety-data-sheets/fdm/support-materials) Enclosure does not need any work after printing. Side clamp diameters slighter larger than holes in halves, allowing them to press-fit in and hold the halves together during the duration of the drop. Is this the most cost effective way? No. Will it survive a 15ft drop? Of course. Video is same design, only within a plastic bag to contain any spills. (it was not needed) Check back for updates.
- 格式
- SOLIDWORKS 2014、STEP / IGES、STL、Rendering
- 分类
- 3D printing、Just for fun、Miscellaneous
- 标签
- 3dprintingegg、tpe、fdm、drop、challenge、egg、print、3d
- 数据更新
- 2026-10-19T20:55:43Z
