GrabCAD 模型信息
ULA Bracket DT-2 · 模型 308234
ULA Bracket DT-2 is optimized version of my first model called ULA Bracket DT-1 Mass = 0.0676 pounds Volume = 1.3959 cubic inches The minimum edge distance surrounding all bolt holes (0.22in) is 2 times the diameter of the bolt hole away from the center and maintained through the depth. The minimum edge distance surrounding all bolt holes (0.27in) is 0.75 times the diameter of the bolt hole away from the center. Strength calculation was performed using Finite Element Analysis and predicted max. von Mises stress = 4257 psi under ultimate load 600 lbf which applied uniformly in the negative Z direction
- 格式
- Rendering、STEP / IGES
- 分类
- 3D printing、Aerospace、Industrial design
- 标签
- ularocket、rockethardware
- 数据更新
- 2026-10-10T04:08:47Z
