GrabCAD 模型信息
ULA Bracket DT-5 · 模型 308195
ULA Bracket DT-5 is optimized version of my previous submission which called ULA Bracket DT-4. Below are additional information : Density : 0.04841 pounds per cubic inch Mass = 0.0857 pounds Volume = 1.7709 cubic inches The minimum edge distance surrounding all bolt holes (0.22in) is 2 times the diameter of the bolt hole away from the center and maintained through the depth. The minimum edge distance surrounding all bolt holes (0.27in) is 2 times the diameter of the bolt hole away from the center and maintained through the depth. Strength calculation was performed using Finite Element Analysis and predicted max. von Mises stress = 4248 psi under ultimate load 600 lbf which applied uniformly in the negative Z direction
- 格式
- STEP / IGES、Rendering
- 分类
- 3D printing、Aerospace、Industrial design
- 标签
- ularocket、rockethardware
- 数据更新
- 2026-10-10T04:08:06Z
