GrabCAD 模型信息
ULA Bracket DT-4 · 模型 308212
ULA Bracket DT-4 was developed based on my previous model which submitted in this challenge. Below are additional information : Density : 0.04841 pounds per cubic inch Mass = 0.09724 pounds Volume = 2 cubic inches The minimum edge distance surrounding all bolt holes (0.22in) is 2 times the diameter of the bolt hole away from the center and maintained through the depth. The minimum edge distance surrounding all bolt holes (0.27in) is 2 times the diameter of the bolt hole away from the center and maintained through the depth. Strength calculation was performed using Finite Element Analysis and predicted max. von Mises stress = 4378 psi under ultimate load 600 lbf which applied uniformly in the negative Z direction
- 格式
- Rendering、STEP / IGES
- 分类
- 3D printing、Aerospace、Industrial design
- 标签
- ularocket、rockethardware
- 数据更新
- 2026-10-10T04:08:52Z
